Spa Baths

SPA.GIENE™ can be used through out the house:

1. Fill bath with cold water above the jets.

2. Measure 50ml of SPA.GIENE™ into your 1 litre auto measure bottle.

3. Turn on all jets and air bubbles and add SPA.GIENE™ to the water.

4. Run for 5 minutes. (If you have an exhaust fan, turn it on during this time). Foaming will occur. You will see areas of brown on the foam (Body fats and hair will show inside or on top of the foam).

5. Turn off pump/air and drain the bath.

6. Whilst draining the bath, with a pair of gloves on, wipe the excess scum from surface of bath with a damp cloth and rinse with tap running.

7. Wipe surface of bath dry with a separate clean & dry cloth.

N.B. For baths that are more than two years old and being treated for the first time, it is recommended to flush clean twice a day for 7 to 10 days to eliminate the build up of body fat and hair.

Washing Machines

Hygenic Flush For Top And Front Loader Washing Machine.

1. Fill washing machine with warm water.

2. Add 100ml SPA.GIENE™.

3. Run a short/normal wash cycle followed by a cold rinse cycle.

Dishwashers

Recommended to flush on a weekly basis.

1. Empty dishwasher.

2. Dislodge and scrub any food fat build up inside the dishwasher.

3. Fill with water and measure 100ml of SPA.GIENE™ (Conveyor Dishwashers 150ml).

4. Add SPA.GIENE™ to dishwasher and run 2 short wash cycles.

5. Drain and refill with fresh water.

6. Run one short wash cycle.

7. Drain water.

CLEANING HINGES AND DOOR SEALS

SPA.GIENE™ can also be used from the bottle on a damp sponge to clean the rubber door seals and hinges before the cleaning process above. The use of gloves is recommended.

General Cleaning

For General Household Cleaning
Multipurpose Spray & Wipe

Dilute SPA.GIENE™ 1:5 with water.
Use for Cleaning of:

All Bathroom Surfaces
Shower Recess
Shower Screen
Basin
Laundry Trough
Telephone Handset
Light Switches

Spa Pool Maintenance

1. Regular cleaning (weekly) and scouring of the spa pool, pipes and pump with SPA.GIENE™ is required to eliminate accumulated body fats and organic waste.

2. Regular cleaning or backwashing of the spa filter to eliminate buildup and prevent clogging of the element pores.

3. Regular dosage with your bactericide, correct water balance and the weekly application of SPA.GIENE™ to clarify and sanitise the recirculated water by effectively killing bacteria and algae. This will result in clear spa water.

Spa Pool Maintenance

Compatible with all other Spa Bactericides i.e.; Chlorine/ Bromine/ Salt Chlorinators.
To be used on a regular basis - once a week or when spa is emptied.
IT¹S THAT SIMPLE!

1. SPA or HOT TUB to be filled to normal level of use - Cold (use existing water)

2. Remove filter cartridge (sand filter-switch to recirculate).

3. Turn on Filter Pump and add SPA.GIENE™ at the rate of 100ml for every 1000 Litres of water.

4. Run for a minimum 4 hours. Foaming will occur but will dissipate. You will see areas of brown (body fat). On completion any surplus foam can be scooped off and wipe the sides of the spa (surface scum) with a clean damp cloth.

5. Replace with a cleaned or new Cartridge Filter or Backwash Sand Filter. The spa can now be used.

The ingredients of SPA.GIENE™ are not classified as Hazardous according to criteria of Worksafe Australia